日本帝人--吉惠工程塑胶

     It is compounded with fluorine powder to improve friction and abrasion resistance, meeting UL 94 V-2. The friction and abrasion resistance is superior than that of polyamidoacetal, maintaining excelle..

     Conforms to ＳＡＥ regurations. It is an injection molding grade that has normal fluidity and weather resistance and is bluish-tinted to exhibit clear color.

     Conforms to ＳＡＥ regurations. It is a thin wall injection molding grade as it has high fluidity, weather resistance and mold release property and is bluish-tinted to exhibit clear color.

     Conforms to ＳＡＥ regurations. It is an injection molding grade that has slightly high fluidity, weather resistance and mold release property and is bluish-tinted to exhibit clear color.

     Glass Fiber 30%/Low Anisotropy/Good Appearance/UL94 V-2，Reinforced with 30 % of special GF and improved appearane grade, meeting UL 94 V-2.

     Glass Fiber 20%/Low Anisotropy/Good Appearance/UL94 V-2，Reinforced with 20 % of special GF and improved appearane grade, meeting UL 94 V-2.